Accueil
Remonter

Cable HP SilverSonic T-14

Silver Sonic T-14 High Resolution speaker cable was designed by D.H. LABS to provide the highest quality sound at a much lower price than competing cables. It uses the finest materials available, including silver, oxygen-free copper and a pure Teflon dielectric.

Silver Sonic T-14 speaker cable has a very low capacitance of 21.5 pico-farads per foot. The inductance is also very low, which allows consistent performance with a wide variety of speakers. In fact, A ten foot length of this cable has less inductance than the output stages of many amplifiers! Vibration damping spacers and a tensioned wrap under the jacket hold the conductors tightly in place, and the cable is completely free from resonances and microphonic effects that cause a loss of resolution. From the deepest bass to the highest treble, T-14 provides the most transparent sound possible, with precise imaging and a large, deep sound stage.

Our quality is second to none. We test every spool of Silver Sonic cable , and our Teflon insulators exceed mil-spec. T-14 is available in bulk lengths, or factory terminated with your choice of connectors. For more information, please contact D.H. Labs.

Cables cinch Silver Sonic BL-1 Serie II Interconnect

SILVER SONIC BL-1 Series II Interconnect is a high performance audio interconnect cable that combines the highest sound quality and reliability available at its price point. In the tradition of our highly acclaimed SILVER SONIC T-14 High Resolution Speaker Cable, SILVER SONIC BL-1 is made in USA and uses the finest materials available, including high purity silver, Teflon and oxygen-free copper.

SILVER SONIC BL-1 is a balanced cable designed for use with both RCA and XLR connectors. It is 100% shielded, and can operate in close proximity to digital equipment without noise pick up. The conductors consist of slow drawn oxygen free copper, which are coated with pure silver, the silver coating thickness being chosen to provide optimum synergy with the OFC base metal. The conductors are insulated with a special Teflon copolymer dielectric.

Silver Sonic BL-1 uses large 20 gauge conductors for low signal loss. Every spool is tested, and our Teflon insulators are made to the highest standards in the industry. Cables are terminated with special silver bearing solders and the finest connectors available. Each connector is meticulously hand soldered by carefully trained craftspeople. Bulk lengths are also available for custom installations.

For more information, please contact D.H. LABS at (561) 745-6406 or contact your SILVER SONIC dealer.

Cable Silver Sonic D-75 Digital Interconnect

The D-75 is a precision 75 ohm coaxial digital cable designed for accurate handling of digital audio signals. The most common use for this cable is to connect the digital output of a CD transport to an outboard Digital to Analog converter or other digital processor. Several features of this cable make it superior for both digital audio and video use.

A solid silver-coated center conductor is used to maintain the most uniform impedance. This minimizes signal reflections, which is very important in digital data cables. The center conductor is encased in a foam Teflon dielectric, which has an extremely low dielectric constant of under 1.4. This provides the lowest dielectric absorption and loss.

Noise rejection is maximized by a 2 Layer shield. This dual shield provides 100% coverage for complete immunity to noise. The combination of a 100% aluminum Mylar shield and a heavy braid keeps ground resistance as low as possible.

The D-75 is available in bulk or carefully terminated with our unique coaxial RCA connector, for minimum reflection and optimum signal transfer. For maximum performance, 75 ohm BNC connectors are available as an option.

In continuing with our policy of providing maximum value, the D-75 costs much less than other digital cables that offer a comparable level of performance.

Cable Silver Sonic D-110 AES/EBU Digital

The Silver Sonic D-110 is a precision 110 Ohm AES/EBU type balanced digital interface cable. 110 Ohm digital cables are most often used to carry digital audio data from A/D converters to digital tape transports in recording studios. They are also used between CD transports and D/A converters in home hi-fi systems as an alternative to the more common S/PDIF 75 Ohm coaxial interface. 110 Ohm cables are terminated with XLR connectors.

The Silver Sonic D-110 was designed to be a state-of-the-art, no compromise product. We feel it’s sonic performance equals or exceeds all other cables of this type, regardless of price. This level of performance is achieved by combining the finest materials available with the highest level of quality control.

A critical goal for any digital interface cable is to maintain a uniform characteristic impedance. This is achieved in the D-110 through the use of a pure Teflon insulation whose thickness is held to a tolerance of .002 inch (.05 mm). The material is extruded under pressure in order to maintain maximum consistency, which minimizes a phenomenon called "VSWR spikes", a cause of jitter.

Other features of the D-110 include silver coated conductors for improved conductivity, solid rod spacers to maintain a constant impedance, and 100% shield coverage to eliminate noise and interference. Our custom D.H. Labs XLR connectors feature direct-gold-plated, pure OFC copper contact pins, far exceeding industry standards.

If your audio system has the ability to utilize the 110 Ohm digital interface, we recommend auditioning the D-110 before investing large sums of money in other cables. Several recording and mastering studios have already selected the D-110 as their cable of choice.